TRASSIR Access Control

TRASSIR Access Control is an access control and management system built into TRASSIR, which can:

  • determine who, where and when is allowed or not allowed;
  • register entrance events and attempts;
  • build various types of reports, including time tracking reports.

You can find a detailed description of all features in the "Operator's guide" in section TRASSIR Access Control.

TRASSIR Access Control setup procedure:

  1. Connect one or several access controllers to TRASSIR. Configure access points and scanners.
  2. Add access points to the usage area.
  3. Create one or several access levels and bind the corresponding access points to them.
  4. Add persons and assign access levels to them.

Tip

You can access the TRASSIR Access Control setting not only via TRASSIR software, but also from the browser. For more information, check Access to TRASSIR Access Control from browser.