TRASSIR settings for operation with Orion Pro access monitoring and control system

Warning

TRASSIR software works with Orion Kernel 1.11 (release 2, build 1713) and Cloud 1.11 (release 2, build 949) and newer. If you are using older versions, you must update your Orion Pro software.

In the Settings window, the settings for connecting to an Orion server are specified on the Modules -> Orion tab.

Tip

For Windows. Before setting up the connection to the "Orion Pro" server, an ODBC source driver should be installed and configured, if necessary. You can read about the configuration procedure in Connecting the data source (ODBC).

For TRASSIR OS. The driver installation and configuration is not required.

  • Protocol - protocol of connection to the "Orion Pro" access control system server.
  • Address - IP-address or DNS-name of Orion Pro access monitoring and control system server.
  • Port - Orion Pro access monitoring and control system server port number.

  • User name and Password - account name and password on Orion Pro access monitoring and control system server (by default: ADMINISTRATOR and ORION).

    Tip

    Please note that the Username and Password are case sensitive!

    Error "Not enough rights (error 112)", in most cases indicates the incorrect user name or password in Orion Pro access monitoring and control system server.

  • This server addressr - IP-address or DNS-name of the current TRASSIR server for feed back to Orion Pro server.
  • Feed back port - port number of the current machine for feed back to Orion Pro server.
  • ODBC Data Source is a full database name, that can be found in the Orion server settings on the "Central server Orion: Database".

  • ODBC user and ODBC password are user name and password to connect to Orion Pro access monitoring and control system data base.

    Tip

    By default Orion Pro access monitoring and control system creates user sa and the password 123456. In these credentials are invalid, we recommend to contact the company which has installed Orion Pro access monitoring and control system.

The Status field indicates the connection state. If all the parameters are set properly, an Orion connected entry is displayed and the new FACS "Orion Pro" objects appear in the TRASSIR object tree.

System objects settings is described in the AMCS or security and fire alarm system objects settings tree.